• Specifying just one value in an operation manual is possible
  In the case where multiple fiber sensors are installed under the same operating conditions, the incident light intensities are nearly identical to each other, allowing for the specification of one threshold across all sensors.
• Maintenance is easy on stabilized fiber sensors
  Because the incident light intensity is stable, the same threshold value can be used even when an amplifier is replaced. Also, copying of setting is easy when used together with optical communication.
• Stability in incident light intensity and confidence in beam adjustment
  When setting up fiber sensors in a row in the same layout, all incident light intensities will display nearly identical values once beams are aligned. This helps to raise installation precision and prevent trouble from occurring before equipment is turned on.
• Improved fiber coupling efficiency and suppressed variation among units
  In each unit we have accurately aligned the central axis of the fiber with the central axis of the emitted light, which creates a high coupling efficiency that helps reduce variation among units.

FX-400 Series Manual Fiber Amplifier

• Just Look and Turn
• Simple, easy to use Fiber Amplifier
• Incident Light intensity and threshold value are displayed simultaneously
• Beam Power greatly increased to give strong performance under adverse environments.
• Interference prevention for up to 8 sets fiber heads (for U-LG)

• Digital display fiber amplifier, wire and labor saving design that allow for side by side configuration for up to 16 units
• Main and sub units are identical; thereby reduce the need for inventory and maintenance

• Easy-to-read OLED display
• Large output indicator
• Fast response time of 35μs

Easy to use

Improved dual digital display
The improved display is very easy to read thanks to the high contrast and the sharp contours of numbers and letters. The dual display shows both the threshold value and the current incident light intensity.
The display is able to display characters just like printed text, so the names of setting options are much easier to understand.

Smart limit teaching
Limit teaching can be done with two pushes of a button even if the emitted light is so strong it causes incident light saturation. No need to adjust the amount of light emitted before teaching.

Eco-friendly

3 ECO mode settings available
By default, the digital display dims when no button is pressed for about 20 seconds. It is possible to completely switch off either the digital display or both the digital display and the output indicator when no button is pressed for about 2 minutes.

Stable light emission thanks to auto power control (APC) and four-element LED
The built-in APC circuit stabilizes the light emission, which tends to fluctuate for a short time when the power is switched on or when there are sudden changes in temperature. In addition, the LED has four instead of the conventional three light-emitting elements, which ensures stable light emission even over long periods of time.

• The FX-100 series digital fiber optic amplifier incorporates a dual display suitable for basic fiber applications.
• It is simple to setup and able to fulfil general applications.