Safety Sensors – Flexible Automation System Co Ltd

SG-P Series

webadmin — Tue, 26 Aug 2025 03:40:28 +0000

Products

SG-P Series

Large and Bright Indicators Show the Open / Close Conditions of All Equipment Doors.
Two Types to Choose from for doors with aluminum frames (Visible type), and for doors without aluminum frames (Compact type)
Flashing Function Notifies Unsafe Condition
Actuator with Industry’s First (Indicator Light Pass-through System)
Master-Slave (Standard / Sub) System for Reduced Wiring Serial Connection of Up to 30 Units without Dedicated Controller
No Cumbersome Manual Pairing Necessary before Installation
Helps Prevent Intentional Deactivation of Safety Function
Maintenance Actuator (sold separately) for Facilitating Maintenance Work
Large and Bright Indicator for the Notification of Maintenance Mode Status to Workers

SF-C21

webadmin — Fri, 01 Nov 2024 09:20:56 +0000

Products

SF-C21

2×4 Safety Input (NPN/PNP selectable), 2×2 PNP Safety Control output, 1×4 PNP Auxiliary output
8 Preset logics make setting easier, just select appropriate control logic by turning a switch for setting
Easy to create safety-certified customized logics via Configurator SF-C software

SF4D

webadmin — Fri, 01 Nov 2024 09:19:38 +0000

Products

SF4D

Downsized internal unit, increased case thickness for better unit body resistance for twisting, warping and impact
New mounting bracket feature both rigidity and ease of handling
New high power optical system offering stable operation even for long distance setup
Complies with IP67 and IP65 (IEC) as well as NEMA Type 13 (NEMA 250)
Digital indicator with a numeric display of light incidence margin facilitates beam axis adjustment and preventive maintenance
Fast response time 10 ms or less
Dead zoneless design enables easy calculation of safe distance.
Series connection of up to 5 units
Selectable synchronization method and cable to suit various applications
Easy to attach / detach front access cable

SF4BC Series Type 4 Safety Sensors

webadmin — Wed, 08 Feb 2023 07:21:41 +0000

Products

SF4BC Series Type 4 Safety Sensors

Compact profile design, maximize the machinery opening area.
The SF4B-C series is designed to fit onto an aluminum frame, maximizing the machinery opening area. It can even allow zero dead zone.
Plastic × metal.
The SF4B-C series features a proprietary double structure of a “plastic body” with a “metal inner frame” which lightens the weight while maintaining the durability.
Maximum protection height of 1,943.4 mm.
Despite its compact, plastic body, the SF4B-C series features a metal inner frame that increases toughness and also keeps its enclosure not to curve.Protective heights range from 263.4 mm to 1,943.4 mm
45% lighter* for easy installation in high places and when mounting long models.
Thanks to its plastic body, the SF4B-C series is 45% lighter* than previous models with aluminium enclosures. This helps to reduce the overall weight of the equipment during transport and when shipping it overseas.
PNP / NPN polarity support.
Since a single model number can be switched between PNP and NPN input, fewer model numbers need to be registered.

SF4C Series Safety Sensors

webadmin — Wed, 08 Feb 2023 07:20:34 +0000

Products

SF4C Series Safety Sensors

Introducing a Type 4 curtain that combines high end performance with an ultra-slim enclosure
The SF4C series has been designed to offer a machine safeguarding solution without sacrificing productivity
Its size and shape allow for it to fit efficiently into small machinery while maximizing the usable working space for the equipment operators

SF2C Series Type 2 Safety Sensors

webadmin — Wed, 08 Feb 2023 07:19:19 +0000

Products

SF2C Series Type 2 Safety Sensors

Slim size for efficient applications.
Available work space is expanded from the previous model, and productivity is improved.
Dramatically less wiring work:
Light curtain wiring consists of just five wires each for the emitter and receiver, allowing you to easily implement safety measures in about the same amount of time as with area sensor.
Beam axis alignment made easy:
The emitter has an effective aperture angle of ±5° or less for an operating range of 3 m 9.843 ft. Compared to Type 4 light curtains (which have an effective aperture angle of ±2.5° or less), the SF2C series is easy to align and install.
Protection structure IP67.
An IP67 (IEC) rating is achieved with an ultra-slim size for protection from environmental factors by a new method.

NA2-N Series Slim Body Area Sensor

webadmin — Sun, 01 Jan 2023 07:03:00 +0000

Products

NA2-N Series Slim Body Area Sensor

Maximum sensing height 540 mm 21.260 in (28 beam channels)

The thin resin case type area sensor has a sensing hight of 540 mm 21.260 in (28 beam channels), a beam pitch of 20 mm 0.787 in (minimum sensing object of ø30 mm ø1.181 in), and sensing range of 5 m 16.404 ft to meet a variety of needs.

Slim body of just 13 mm 0.512 in thick

The slim-bodied NA2-N series fits right in your equipment, since it is only 13 mm 0.512 in thick and 30 mm 1.181 in wide. It dose not get in the way of your access to the machine.

6 types of sensing height

In addition to the conventional 12, 16, and 20 beam channel types, this new lineup includes 8, 24, and 28 beam channel types. A wide model variation is provided with sensing heights from 540 mm 21.260 in (28 beam channels) to 140 mm 5.512 in (8 beam channels).

Globally usable

It conforms to the EMC Directive, EMC Regulation and obtains the UL Recognition. Moreover, PNP output type which is much in demand in Europe is also available.

Clearly visible wide job indicator

Both the receiver and the emitter feature job indicators, 102 mm 4.016 in wide, with red bright LEDs. When the sensing output and the job indicator input are connected, the job indicator can be used as a large operation indicator.

Interference prevention for parallel installation

By setting different emission frequencies for two sensors, mutual interference can be prevented. There is no problem even when the sensors are parallel installed for wide detections area coverage. Moreover, the set frequencies can be identified by how many times the emitting indicators is light up.

Selectable lighting pattern

The operation of the job indicator can be selected using the operation mode selection switch.

Convenient test input (emission halt) function

Beam output can be stopped via the input of an external signal. This is an useful test input (emission halt) function when beginning operation.

Note: The photo above shows an 8 beam channels type. The operation mode selection switch is equipped on the left side of the main body for models other than the 8 beam channels type.